HERMA PE white 150 (859)
White, glossy, polyethylene film with corona pretreatment
Technical data
| Grammage | approx. 142 g/m² | ISO 536 |
| Caliper | approx. 150 µm | ISO 534 |
| Tensile stress MD | approx. 16 N/mm² | ISO 527 |
| Tensile stress CD | approx. 15 N/mm² | ISO 527 |
| Surface gloss Angle: 60° to the perpendicular | approx. 80 GU | ISO 2813 |
| Opacity | approx. 85 % | ISO 2471 |
Application and use
The glossy surface of HERMA PE 150 white with its corona pretreatment offers an excellent print quality in conventional printing techniques. Before printing we recommend to freshen up the corona pretreatment.
HERMA PE white 150 is perfect for the production of optically demanding, glossy and opaque labels. For recycling reasons these labels are preferably used on PE surfaces.
Thanks to the flexibility of this PE film even curved surfaces may be labelled without any problems as well as squeezable packaging.
Recommended storage
See HERMA website: www.herma.com/material/storage-conditions/
Regulations concerning contact with food
The label film HERMA PE white 150 (859) is not intended for contact with food.
Disclaimer
All statements, technical information and recommendations regarding HERMA products are given in good faith and are based on tests that we believe to be reliable, but do not constitute a guarantee or warranty. We give no guarantee as to the suitability of the product for a specific application, this should be tested by the user. Unless otherwise agreed in writing, we only accept liability within the scope of our General Terms and Conditions of Delivery and Payment.
HERMA GmbH, Adhesive Material Division, 70791 Filderstadt, Phone +49 (0) 711 7702-0
Demander un échantillon
Il suffit de demander votre échantillon du produit via notre formulaire.
