Adhesive 64Z
Permanent, acrylic based adhesive
Technical data
| Tack | extremely high | |
| Peel adhesion | extremely high | |
| Shear | very high | |
| Minimum application temperature | 0 °C | |
| Service temperature | -30 to 70 °C up to 200 °C for short periods - hot fusing |
Application and use
Adhesive 64Z covers a very wide range of applications. Thanks to its aggressive adhesion properties it is suited for an extensive variety of even critical surfaces such as rough cardboard and slightly dirty surfaces. The adhesive is highly resistant to heat, light and ageing.
Processing
Good die-cutting characteristics on all customary machines.
Storage conditions and shelf life
Storing at a temperature of 20 ± 5 °C, a relative humidity of 45 ± 5 % and a dark storage is recommended. Moisture, heat and direct sunlight have to be avoided.
Regulations concerning contact with food
All ingredients of adhesive 64Z comply with recommendations BfR XIV or FDA 21 CFR 175.105 (Adhesives).
Disclaimer
All statements, technical information and recommendations regarding HERMA products are given in good faith and are based on tests that we believe to be reliable, but do not constitute a guarantee or warranty. We give no guarantee as to the suitability of the product for a specific application, this should be tested by the user. Unless otherwise agreed in writing, we only accept liability within the scope of our General Terms and Conditions of Delivery and Payment.
HERMA GmbH, Adhesive Material Division, 70791 Filderstadt, Phone +49 (0) 711 7702-0
Demander un échantillon
Il suffit de demander votre échantillon du produit via notre formulaire.
