Adhesive 61Dpc

Application and use

The adhesive 61Dpc is specially designed for A4 sheets, which are used in laser printers and in copiers (in xerographic printing processes). Thanks to the innovative multilayer (double-layer) technology it was possible to increase the cohesion and thus significantly reduce the adhesive bleed. An ideal feed through can be achieved as well as the impurities caused by adhesive bleed can be avoided by the use of the 61Dpc.
Less suitable for rough or curved surfaces.
The 61Dpc has an excellent resistance to aging, heat and light.

Processing

Excellent die-cutting characteristics on all customary machines.

Storage conditions and shelf life

Storing at a temperature of 20 ± 5 °C, a relative humidity of 45 ± 5 % and a dark storage is recommended. Moisture, heat and direct sunlight have to be avoided.

Regulations concerning contact with food

All ingredients of adhesive 61Dpc comply with recommendation BfR XIV or FDA 21 CFR 175.105 (Adhesives).

The pressure-sensitive adhesive 61Dpc can be safely used for the back coating of labels for the labelling of foodstuffs for storage at room temperature and below. It may be used in direct contact with dry, moist and fatty foodstuffs that can be assigned a correction factor of at least 4 in accordance with Regulation (EU) No. 10/2011. Furthermore, the adhesive may be used for laminating various materials. In this case, cut edge contact with food is harmless as far as the above mentioned adhesive is concerned. It must be ensured that the relevant migration limits are complied with by the laminated packaging (Declaration of no objection valid until 17.04.2027).