HERMAlaser opaque (127)
White label paper especially for laser printers and copiers, with purple reverse side coating for higher opacity
Technical data
| Grammage | approx. 77 g/m² | ISO 536 |
| Caliper | approx. 77 µm | ISO 534 |
| Tensile strength MD | approx. 63 N/15 mm | DIN 53112 |
| Tensile strength CD | approx. 33 N/15 mm | DIN 53112 |
| Stiffness MD | approx. 160 mN | DIN 53121 |
| Stiffness CD | approx. 90 mN | DIN 53121 |
| Opacity | approx. 99 % | ISO 2471 |
Application and use
The surface of HERMAlaser opaque offers good printability with most inkjet printers and xerographic printing systems. We recommend preliminary suitability tests.
The paper is of captivating opacity and thus particularly suited for the labelling of surfaces which have to be obscured.
Applications include labels for file folders, CD labels and barcode labels in the logistics chain. Water-based inks may have an adverse influence on the flatness of the sheet stock. We therefore advise against the use of water-based inks especially when printing large areas.
Recommended storage
See HERMA website: www.herma.com/material/storage-conditions/
Regulations concerning contact with food
The reverse side coating does not comply with the German BfR Recommendation XXXVI (direct contact with food).
Disclaimer
All statements, technical information and recommendations regarding HERMA products are given in good faith and are based on tests that we believe to be reliable, but do not constitute a guarantee or warranty. We give no guarantee as to the suitability of the product for a specific application, this should be tested by the user. Unless otherwise agreed in writing, we only accept liability within the scope of our General Terms and Conditions of Delivery and Payment.
HERMA GmbH, Adhesive Material Division, 70791 Filderstadt, Phone +49 (0) 711 7702-0
Demander un échantillon
Il suffit de demander votre échantillon du produit via notre formulaire.
